Mineralogical and chemical evolution of the Ernest Henry Fe oxide–Cu–Au ore system, Cloncurry district, northwest Queensland, Australia     

Geordie Mark  Nicholas H. S. Oliver  Patrick J. Williams 《Mineralium Deposita》2006,40(8):769-801

The Ernest Henry Cu–Au deposit was formed within a zoned, post-peak metamorphic hydrothermal system that overprinted metamorphosed dacite, andesite and diorite (ca 1740–1660 Ma). The Ernest Henry hydrothermal system was formed by two cycles of sodic and potassic alteration where biotite–magnetite alteration produced in the first cycle formed ca 1514±24 Ma, whereas paragenetically later Na–Ca veining formed ca 1529 +11/−8 Ma. These new U–Pb_titanite age dates support textural evidence for incursion of hydrothermal fluids after the metamorphic peak, and overlap with earlier estimates for the timing of Cu–Au mineralization (ca 1540–1500 Ma). A distal to proximal potassic alteration zone correlates with a large (up to 1.5 km) K–Fe–Mn–Ba enriched alteration zone that overprints earlier sodic alteration. Mass balance analysis indicates that K–Fe–Mn–Ba alteration—largely produced during pre-ore biotite- and magnetite-rich alteration—is associated with K–Rb–Cl–Ba–Fe–Mn and As enrichment and Na, Ca and Sr depletion. The aforementioned chemical exchange almost precisely counterbalances the mass changes associated with regional Na–Ca alteration. This initial transition from sodic to potassic alteration may have been formed during the evolution of a single fluid that evolved via alkali exchange during progressive fluid-rock interaction. Cu–Au ore, dominated by co-precipitated magnetite, minor specular hematite, and chalcopyrite as breccia matrix, forms a pipe-like body at the core of a proximal alteration zone dominated by K-feldspar alteration. Both the core and K-feldspar alteration overprint Na–Ca alteration and biotite–magnetite (K–Fe) alteration. Ore was associated with the concentration of a diverse range of elements (e.g. Cu, Au, Fe, Mo, U, Sb, W, Sn, Bi, Ag, F, REE, K, S, As, Co, Ba and Ca). Mineralization also involved the deposition of significant barite, K(–Ba)–feldspar, calcite, fluorite and complexly zoned pyrite. The complexly zoned pyrite and variable K–(Ba)–feldspar versus barite associations are interpreted to indicate fluctuating sulphur and/or barium supply. Together with the alteration zonation geochemistry and overprinting criteria, these data are interpreted to indicate that Cu–Au mineralization occurred as a result of fluid mixing during dilation and brecciation, in the location of the most intense initial potassic alteration. A link between early alteration (Na–Ca and K–Fe) and the later K-feldspathization and the Cu–Au ore is possible. However, the ore-related enrichments in particular elements (especially Ba, Mn, As, Mo, Ag, U, Sb and Bi) are so extreme compared with earlier alteration that another fluid, possibly magmatic in origin, contributed the diverse element suite geochemically independently of the earlier stages. Structural focussing of successive stages produced the distinctive alteration zoning, providing a basis both for exploration for similar deposits, and for an understanding of ore genesis.  相似文献   

湖南船岭脚锡矿区矿化特征及成因探讨   总被引：2，自引：1，他引：2  

曾永红  王廷江  郑时干  曾志方 《华南地质与矿产》2006,(2):13-17

船岭脚锡矿为南岭锡多金属成矿带的一大型锡矿床。矿化类型较多,以构造蚀变带-矽卡岩复合型、接触带矽卡岩型锡矿为主,分布于中侏罗世姑婆山岩体接触带,且具分带性,自岩体内接触带往外依次为构造蚀变带-矽卡岩复合型、接触带矽卡岩型。矿化与成矿岩体及构造复合等因素密切相关,成矿物质主要来源于岩浆,为一与花岗岩有关的中高温矽卡岩型矿床。  相似文献   

利用三维地震在戈壁沙漠区解决复杂地质构造问题     

张灯亮徐忠华  牛小军 《中国煤田地质》2006,18(4):59-61

在分析戈壁沙漠地区地球物理特征的基础上，针对性的提出了解决煤田地质构造问题的方法，包括三维地震野外施工方法的选取、施工因素的选择、资料处理手段；并以获得的实际地质成果证实三维地震在解决复杂地质构造问题的可行性。  相似文献   

Seismic Hazards Assessment for Radioactive Waste Disposal Sites in Regions of Low Seismic Activity   总被引：4，自引：0，他引：4  

Clark H. Fenton  John Adams  Stephen Halchuk 《Geotechnical and Geological Engineering》2006,24(3):579-592

A comparative tectonic quiescence and lack of earthquakes make the stable centres of continents attractive for siting long-term radioactive waste storage facilities. The low rates of deformation in such regions, however, make it difficult to characterize their long-term seismotectonic behaviour, leading to uncertain estimates for the very low probability hazard estimates required by society. In an attempt to overcome the deficiency of both contemporary seismicity and paleoseismic data in central Canada, we have used earthquake histories from regions with similar seismotectonic characteristics from around the world. Substituting space for time, we estimate a long-term rate per 10⁶ km² of 0.004 magnitude ≥6 earthquakes per annum, of which 33–100% might rupture to the surface.  相似文献   

陆相油藏中砂泥岩互层时移地震遮掩效应及其对时移地震资料解释的影响     

WANG Da-wei 《现代地质》2006,(4)

从差异波形特征的角度出发,分析时移地震差异波形特征与砂泥岩互层油藏中油层速度变化的关系。通过建立由5层地层组成的楔形地质模型,运用褶积公式及时移地震求差公式,得到泥岩速度为2 400 m/s和砂岩速度为2 700m/s条件下,互层中砂岩速度变化±150 m/s的时移地震响应。研究结果表明:砂泥岩互层的差异波形是一个多峰复合波,泥岩夹层的厚度是决定差异波形特征的一个主要因素,并且存在一个临界值,即四分之一主波长;如果泥岩夹层的厚度小于这一临界值,就会发生遮掩效应,即顶部油层的时移地震响应可以掩盖中、下部油层的时移地震响应。  相似文献   

深层地震勘探激发井深探讨     

HUANG Ling YANG Guang-da HAN Li-guo .Geophysical Exploration Company of Jilin Petroleum Group Co.  Ltd  Songyuan  China .Jilin Petroleum Group Company  Songyuan    China .College of GeoExploration Science  Technology  Jilin University  Changchun  China 《吉林大学学报(地球科学版)》2006,(Z2)

深层地震勘探野外资料采集的关键是在保证原始资料一定信噪比的基础上,同时兼顾分辨率,激发井深是决定资料品质的重要因素之一。通过对虚反射滤波作用分析,提出了充分利用虚反射能量设计最佳激发井深,增强下传地震波能量的采集方法。理论分析和试验资料表明,在高速层下4～7m的最佳激发岩性深度是深层勘探的理想井深。  相似文献   

大别山造山带前陆深地震反射剖面   总被引：18，自引：0，他引：18       下载免费PDF全文

董树文 高锐李秋生  刘晓春钱桂华黄东定  匡朝阳李三忠管烨  白金贺日政  李朋武 《地质学报》2005,79(5):595-601

在大别山南部和扬子地块前陆实施的深地震反射剖面(140 km)揭示出大别山造山带前陆地壳的精细结构。总体北倾的地壳内部结构与向北缓倾的叠瓦状莫霍面反射揭示出扬子陆块向北俯冲的行迹。莫霍面向北插入大别山造山带下与南大别山地壳内南倾反射震相叠置,构成交叉反射图像,刻画出扬子前陆与大别山造山带的碰撞构造面貌。  相似文献   

地震波混合阶褶积算法模拟   总被引：6，自引：0，他引：6  

戴志阳  孙建国  查显杰 《物探化探计算技术》2005,27(2):111-114

基于正反傅立叶变换,提出了地震波模拟的混合阶褶积算法。该方法原理简单、易于实现,结合了有限差分与伪谱法的优点,具有较高的精度和计算效率,适用于地震波场的正演计算,同时还给出了二维地震波场的理论计算实例。计算结果表明,此算法模拟结果正确、精度高、速度快、能适应较为复杂地质模型,并且易于推广到各向异性介质中去。  相似文献   

济阳坳陷古潜山地震采集技术研究     

徐国盛  冯刚  谭绍泉  李显贵  何建军  康家光 《物探化探计算技术》2005,27(3):199-204

济阳坳陷碳酸盐岩古潜山以前地震资料存在信噪比低、速度陷阱、分辨率低、施工过程中缺炮、空道、内幕反射品质差或无反射等问题。造成上述问题除了野外施工工艺、室内处理流程和参数的影响外,在采集参数方面主要影响因素有覆盖次数低、炮检距与方位角不均匀、面元太大等。针对济阳坳陷古潜山三维地震资料采集应以目标设计为指导思想,以基于模型分析的三维采集参数论证为主线,最终优化各种采集参数。建立了拱张褶皱型、断裂块断型和风化残丘型三个具有代表性的古潜山地质理论模型。使用先进的“绿山”地震采集观测系统设计软件,采用“块”来描述任意复杂地质模型结构,分别设计出各自的地震采集观测系统。以林樊家潜山为例,采用12线18炮束状新观测系统模拟单炮发射接收,对各主要目的层能追踪的地层信息比原始6线9炮束状观测系统采集的地震信息丰富,能准确反映地下构造形态与地质体的物理属性。  相似文献   

层序的测井、地震响应特征研究   总被引：3，自引：5，他引：3  

田景春  张翔  聂永生  夏青松  赵强  韦东晓  李强  李国忠  吴琦 《物探化探计算技术》2005,27(4):321-326

在层序地层学研究中,关键是层序划分和对比。而层序划分、对比的关键是层序识别。层序的识别包括层序界面(层序的底界面、初始海泛面和最大海泛面)的识别和构成层序的体系域识别。这里,在众多前人研究成果的基础上,详细研究了层序的测井、地震响应特征,即层序界面和体系域在测井曲线上和地震剖面上的特征。其中,层序底界面在测井上表现为突变的钟型、箱型或侧积式曲线的底界;在地震剖面上表现为剥蚀、顶超、上超、下超;而体系域在测井曲线上的响应为:低水位体系域的海底扇以漏斗形中、高幅的前积式,或钟型中、低幅的后积式模式为特征,陆坡扇成钟型、正向齿形,自下而上幅度由中高幅→低幅,即具后积式测井模式,低水位楔的测井曲线表现为旋回性进积模式特征,其特征表现为锯齿状箱型。海侵体系域的测井曲线呈现向上变细、变深序列,并表现为钟型、正向齿形或齿化状,幅度由高幅变化为低幅,包络线具后积式特征。高水位体系域相应的测井曲线呈现中幅箱形或桶形,不同体系域在地震剖面上的响应特征明显不同。  相似文献